- Technology
-
Material comparison
-
Material comparison
-
Material comparison
-
Material comparison
Material comparison
DSE's technology has been verified by thorough quality control and various certifications.
Recommendations per Material Usages
You can view the recommendation standards for each material’s usage.
※ If the entire table is not visible, you can scroll the table left and right to check the entire table.
| Material | ABS | AC | POLYCARBONATE (Lexen 943AR/123R) |
POLYESTER | NYLON |
|---|---|---|---|---|---|
| Outdoor Use | ▲ | ★★★ | ★★★ | ★★★★★ | ● |
| Indoor Use | ★★★ | ★★★★★ | ★★★★★ | ★★★★★ | ★★★★★ |
| Robustness | ★ | ★★★ | ★★★★ | ★★★★ | ★★★ |
| Lightweight | ★★★★★ | ★★★★★ | ★★★★★ | ★★★★★ | ★★★★★ |
| Impact Resistance | ★★★ | ★★★★★ | ★★★★★ | ★★★★★ | ★★★ |
| Aloohols | ★★★ | N | ★★★ | ★★★ | ★★★ |
| Ketones | ▲ | ▲ | ▲ | ▲ | N |
| Esters | ● | ● | ● | ▲ | N |
| Alkalis | ★ | ● | ▲ | ▲ | N |
| Oils (unsaturated aliphatie mixtures) | ★★★ | ● | N | ★★★★★ | N |
| Waxes (heavyoils) | ★★★ | ★★★ | N | ★★★ | N |
| Brake fuld | ▲ | ▲ | N | ★★★★★ | N |
| Hot water (80℃ or Higher) | ★★★ | ★★★ | N | ★★★ | N |
| ★★★★★ (Very Good : unaffected is its performance with regard to time, temperature and stress) ★★★ (Good : acceptable in normal exposure, but higher temperatures may result in major loss of properties) ● (Fair : only for short exposures at lower temperatures or when loss of mechanical properties is not critical) ▲ (Poor : not recommended) N (not tested) |
|||||